-
product
Thin-film deposition
Plasma Source
SPECS Surface Nano Analysis GmbH
Thin-film deposition covers any technique for depositing material onto a bulk or thin film substrate. Elemental alloy or compound films are produced by non-reactive or reactive (co-)deposition. Often functionalization or tailoring of device interfaces by predeposition or deposition assisting surface treatment with atoms or ions is necessary.
-
product
Metal-Organic Compound Chemical Vapor Deposition
Model MOCVD-500-A
For Experimental growth of quality epitaxial layers III-V, II-VI compounds. Multi-Layer structures. Directly heated silicon carbide coated, high purity graphite or PBN susceptor. Low mass thermocouple probe immersed into susceptor. Broad temperature and pressure application. Highest quality materials utilized throughout.
-
product
Matrix Vapor Deposition System
iMLayer
The iMLayer matrix vapor deposition system is sample pretreatment (application of matrix) in order to perform MALDI-MS imaging using an analysis system such as the iMScope imaging mass microscope or the MALDI-7090. With the iMLayer, the deposition method has been adopted as a pretreatment method to achieve high spatial resolution. By using this method, fine matrix crystal can be produced. Also, thanks to automated control, the coating thickness is reproducibly controlled as users configure.
-
product
Physical Vapor Deposition Systems
Physical Vapor Deposition Systems offer maximum flexibility for a wide range of thin film deposition applications with advanced process capabilities, unsurpassed uniformity and multiple deposition modes.
-
product
Parylene Deposition Equipment
SCS offers Parylene deposition systems that range from a portable laboratory unit to production models for high-volume manufacturing applications. SCS Parylene deposition systems are designed for accurate and repeatable operation, featuring closed-loop monomer pressure control, which ensures deposition of the polymer film at a precise rate. Whether researching new coating applications or developing structures out of Parylene in the laboratory, or coating components in a production environment, SCS leads the industry with its state-of-the-art Parylene deposition systems.
-
product
Ion Beam Deposition
Create ultra-precise, high-purity, thin film layer devices with maximum uniformity and repeatability with Ion Beam Deposition (IBD) Systems.
-
product
Particle Deposition Systems
Sets the standards for wafer inspection and metrology equipment. This advanced tool is vital for increasing the yield of future leading-edge devices, while meeting the measurement needs of today.
-
product
Particle Deposition Systems
MSP’s 2300G3 Particle Deposition System sets the standards for wafer inspection and metrology equipment. This advanced tool is vital for increasing the yield of future leading-edge devices, while meeting the measurement needs of today.
-
product
Dynamic Scale Deposition Loop System
Dynamic Scale Deposition Loop fully automated systems includes hardware and software to measure and evaluate the performance of scale inhibitors under high pressure and high temperature conditions.
-
product
Chemical Vaper Deposition R&D System
MODEL CVD-300-M
High Temperature, 1080 C (24" Hot Zone: 126 Cubic In.) High Purity Quartz Tube with Water Cooled End Caps. Broad Pressure Range of Atmosphere to 10-3 Torr. Upgradable to High Vacuum. Computer Interfaceable. Small Footprint (26" x 48"), Portable with caster mounts.
-
product
PLD/PED Components
Neocera offers a variety of components that can be fitted and combined into new or existing PLD and PED systems to provide improved functionality and enhanced capability. Components include:*Oxygen-compatible substrate heaters for epitaxial oxide film depositions..*Automated Target Carousels for preparing multilayer heterostructures.*Deposition chambers design specifically for PLD and PED systems.*Manual and automated laser window-change Accessories.*Pulsed Electron Deposition (PED) sources for laser transparent materials.*Ideal for retrofitting existing systems or construction of new systems.
-
product
Ozone Gas Generators
SEMOZON® Ozone gas generators and subsystems are the industry standard for compact, high concentration, ultra-clean ozone gas generation. Applications include Atomic Layer Deposition (ALD), Atomic Layer Etch (ALE), Chemical Vapor Deposition (CVD) and Wet Cleaning.
-
product
kSA BandiT
The kSA BandiT is a non-contact, non-invasive, real-time, absolute wafer and thin-film temperature monitor used during thin-film deposition and thermal processing.
-
product
PLD Systems
Pulsed Laser Deposition
Is a versatile thin film deposition technique. A pulsed laser (~20 ns pulse width) rapidly evaporates a target material forming a thin film that retains target composition. This unique ability of stoichiometeric transfer of target composition into the film was realized first by the research team led by Dr. Venkatesan at Bell Communications Research, NJ, USA, nearly 30 years ago while depositing high temperature superconducting (YBa2Cu3O7) thin films. Since then, PLD has become the preferred depo...show more -
product
Pulsed-DC Systems
Extend process innovation with Advanced Energy’s comprehensive pulsed-DC suite. Minimize arcing, enhance deposition rate, improve film flatness and packing density.
-
product
Vaporizers
Vaporizers are the backbone of gas phase processes, serving as the catalyst for converting liquids into essential gases. This transformative process is indispensable in a myriad of applications, ranging from precision thin film deposition to critical procedures like metal etching and doped epitaxial growth.
-
product
Inline Wafer Testing
IL-800
Pre-process elimination of low-quality wafers using measured lifetime, trapping, and resistivity. Process control and optimization at dopant diffusion and nitride deposition steps.
-
product
Process Sense™ NDIR End Point Detector For Chamber Clean
The Process Sense endpoint sensor is a small, low-cost SiF4 sensor specifically designed for Remote Plasma Chamber Clean Endpoint detection for silicon-based CVD deposition chambers. Process Sense is based on infrared absorption, the only technique applicable to all plasma cleaning processes (in-situ and remote). It gets mounted onto a bypass on the rough line, ensuring no effect on deposition hardware. The signal level reported by the Process Sense, which is proportional to SiF4 concentration, can be used to determine the completion of the chamber clean process.
-
product
In-Situ Spectroscopic Ellipsometer for Real-Time Thin Film Monitoring
UVISEL Plus In-Situ
The UVISEL Plus in-situ spectroscopic ellipsometer can be easily mounted on process chambers (PECVD, MOCVD, sputter, evaporation, ALD, MBE) for the real-time control of thin film deposition or etch processes.The UVISEL Plus in-situ provides the unique combinations of very high speed, sensitivity, dynamic range and accuracy making the instrument able to control deposition / etch at the atomic layer thickness level, even for rapid processes.
-
product
Liquid Flow Controller
Built upon field proven technology, the Turbo™ Liquid Flow Controller (LFC) 2950 was engineered to pair with MSP Turbo II™ Vaporizers to provide a reliable, high-performance liquid vapor delivery solution for semiconductor thin film deposition processes (including CVD, PECVD, ALD, and MOCVD). The diagram below shows how the LFC fits into the liquid vaporization system MSP offers.
-
product
Plasma Emission Controller
RU-1000
The optical technology developed by HORIBA and the gas control technology offered by HORIBA STEC have been combined to make further advances in plasma control technology. The plasma emission controller RU-100 offers; faster deposition by controlling the transition region, optimized distribution in a large-area, high-capacity chamber, plasma stabilization in a long sputtering process (stable deposition), and mixture optimization of compounds for reactive sputtering.
-
product
GHW Series 13.56 MHz, 1.25, 2.5, And 5.0 KW High-Reliability RF Plasma Generators
The GHW Series RF power generators deliver maximum rated output powers of 1250, 2500 and 5000 Watts at a frequency of 13.56 MHz. The GHW generators offer field-proven reliability, exceptional stability, and unsurpassed repeatability for high uptime and process yield. They are ideally suited for Plasma Enhanced Chemical Vapor Deposition (PECVD), High Density Plasma CVD (HDPCVD), etching and other thin film applications during the manufacture of integrated circuits, flat panel displays, and data storage devices.
-
product
Process Particles Suspensions
Process Particles™ Suspensions are used as particle material standards. They represent real-world contaminant particles encountered in semiconductor device fabrication processing. Deposition of these particles on wafers and reticles enables characterization of the material-dependent response of a surface inspection system when accurate particle size or particle sphericity are of secondary importance. They consist of broad size distributions of irregularly shaped solid particles suspended in ultra-pure water (UPW). Each bottle contains a suspension volume of 100 mL.
-
product
Vapor Concentration Monitor
IR-300 Series
Metal-Organic Chemical Vapor Deposition (MOCVD) is widely used in the manufacture of LEDs, optical devices and other components. Liquid and solid precursors are delivered to the reaction chamber by controlling the temperature, pressure and the carrier gas flow rate (bubbling method). Process results can be affected by changes especially in temperature and liquid level. The in-line IR-300 Series measures and reports the precursor concentration in real time.
-
product
High Temperature Absolute Pressure Transducers
Our high temperature Baratron® capacitance manometers are controlled to temperatures of 150°C or higher for use use in demanding semiconductor manufacturing vacuum processes such as metal etching and nitride film chemical vapor deposition (CVD).
-
product
High Power Microwave Plasma Source
The High Power Microwave Plasma Source can be combined with a 6kW microwave generator for a high concentration of radicals providing a high productivity manufacturing solution. The High Power Microwave Plasma source is capable of igniting in multiple process gases, over a wide operating range with performance benefits in current and emerging applications such as, high throughput photoresist removal, advanced surface cleaning and conditioning, as well as, advanced deposition applications at the atomic level.
-
product
kSA RateRat Pro
kSA RateRat Pro is a compact, convenient and easy-to-use optical metrology tool for thin-film characterization. Its unique capability is to measure, in situ and in real-time, optical constants (n and k), deposition rate and film thickness.
-
product
Burnbox & Scrubber Systems
MODEL BBS-10-LM
Safe, low costing, and minimal maintenance exhaust gas abatement equipment designed for years of continuous operation. Systems designed to significantly diminish toxic, corrosive, flammable, and pyrophoric gas exhaust to safe levels. Ideal for treating the exhaust effluents from process systems such as a deposition and etch reactor. Burnboxes, scrubbers and combinations are available, tailored to suit your exact requirements.
-
product
A Highly Versatile R&D Bell Jar Thin Film Coating System.
MODEL VES-3000
TEK-VAC's VES-3000 coater station model offers a modular concept for thin film deposition. Common PVD techniques which can be employed in this compact unit include thermal and electron beam evaporation. A 2KVA SCR controlled filament evaporation power supply is provided. Optional ion deposition and magnetron sputtering devices can be incorporated in the system.
-
product
Dimensional Metrology
Stand-Alone Metrology Family
Nova Measuring Instruments Inc.
Nova’s stand-alone metrology platforms are utilized to characterize critical dimensions such as width, shape and profile with high precision and accuracy and are used in multiple areas of the fab such as photolithography, etch, CMP and deposition in the most advanced technology nodes, across all semiconductor leading customers.
